Philips HeartStart XL Defibrillator

Product Descriptions:

The Philips HeartStart XL Defibrillator, at just under 14 lbs., is easily transported throughout the hospital to the site where cardiac care is needed. A combination manual device with automated external defibrillator capabilities, HeartStart XL enables the first caregiver on the scene, whether an ACLS or BLS clinician, to deliver lifesaving defibrillation therapy.

In AED mode, voice prompts and text messages guide BLS users through the defibrillation process, while the HeartStart XL continuously monitors and displays the patient’s ECG.

Upon the arrival of ACLS personnel, HeartStart XL is easily switched between AED to manual mode, allowing operators to access the unit’s advanced therapeutic features such as selectable energy (2 to 200 Joules), non-invasive pacing (optional), SpO2 (optional) and synchronized cardioversion.
The Philips HeartStart XL defibrillator is a small, user-friendly monitor and defibrillator. Philips’ HeartStart XL reaches maximum power in only three seconds. With an array of AED possibilities, text messages, patient data storage, and voice directions, the Philips HeartStart XL is sure to fulfill all your defibrillation needs. Additional features of the HeartStart XL include

ECG monitoring with display for multi-wave view
Manual and AED operation modes
Printable patient event summary
Internal data storage in the HeartStart XL

Defibrillator
Waveform Biphasic Truncated Exponential. Waveform parameters adjusted as a function of patient impedance
Shock Delivery Via multifunction defib electrode pads or paddles
Charge Time Less than 3.5 seconds to 200 Joules with a new, fully charged M3516A SLA battery pack at 25C; Less than 15 seconds to 200 Joules when powered by AC with no battery installed
Patient Impedance Range Minimum – 15 Ohm (internal defibrillation); 25 Ohm (external defibrillation); Maximum – 180 Ohm

SpO2 Pulse Oximetry
Wavelength Range 500 – 1000 nm
Resolution 1%

Dimensions
Width 14.8 in/37.6 cm
Height 7.5 in/19 cm
Weight 13.3 lbs/6.0 kg, including battery and full roll of paper

Display Screen
Type LCD – TFT Color Liquid Crystal Display
Size 111.4 mm x 83.5 mm
Resolution 320 x 240 pixels
Sweep Speed 29 mm/s nominal (stationary trace; sweeping erase bar)

Noninvasive Pacing:
Waveform: Monophasic Truncated Exponential
Current Pulse Amplitude: 10 mA to 200 mA (5 mA Resolution); Accuracy 10 mA to 50mA ± 5mA, 50 mA – 200mA ± 10%
Pulse Width: 20 ms with accuracy of +0, -5 ms
Rate: 30 ppm to 180 ppm (10ppm increments); accuracy ± 1.5%
Modes: Demand or Fixed Rate
Refractory Period: 340 msec (30 to 80 ppm); 240 msec (90 to 180 ppm)

Event Storage:
Internal storage up to 300 events and 50 ECG strips at 11 seconds each
Events can be marked with a Mark symbol and, if configured for dug annotation, the following labels can be added:

Thermal Array Printer:
Continuous Real-Time Strip: User starts and stops the strip. The strip prints the selected ECG lead.